technical knowledge

The installation location of the cooling tower has the following requirements: Ventilation requirements The cooling tower should be installed in a place with sufficient air inlet volume to ensure sufficient air flow into the tower. The distance between the air inlet side and the building should be greater than 1000mm to avoid poor ventilation affecting […]

The installation process of spray exhaust cooling tower needs to pay attention to the following: 1. Site selection and site preparation The cooling tower should be installed in a place with good ventilation conditions to ensure air circulation and avoid poor ventilation affecting the heat dissipation effect. The installation site should be kept away from

Spray exhaust cooling towers are suitable for the following locations: Industrial cooling Especially in scenarios where the operating temperature of machines or equipment needs to be reduced, such as the cooling of high-temperature furnaces, furnaces, and other equipment. Spray cooling towers are able to effectively remove the heat generated by the equipment through the evaporation

The working principle of the condenser can be clearly divided into the following steps: Cooling Phase: The gas or vapor flows through a ductwork system inside the condenser. These gases or vapors come into contact with a cooling medium, such as water or air, to initiate heat exchange. In this stage, the cooling medium absorbs

There are distinct differences between air condensers and water condensers in several ways, and here is a detailed analysis of their differences: Cooling medium: Air condenser: uses air as the cooling medium to remove the heat of condensation of refrigerant vapors through the natural convection or forced flow of air. Water condenser: water is used

As an important heat exchange equipment, the common application scenarios of water condenser can be summarized as follows: Refrigeration: In refrigeration systems, water condensers are often used to change the refrigerant from a gaseous to a liquid state to ensure that the refrigeration system can function properly. It uses cooling water to condense high-temperature and

Water condenser is an important heat exchanger, and its main role is reflected in the following aspects: Temperature control in industrial processes: Water condensers are often used in the industrial field to reduce the temperature of heated industrial fluids through the cooling of the fluid flowing through the outer surface through their heat exchange function,

An ejector in the petrochemical industry is a fluid machine with a wide range of applications. Here’s a detailed explanation of injectors in the petrochemical industry: Definition The ejector uses the jet action of the working fluid to transfer energy and mass, which has the role of transportation and mixing. Type According to the different

In the chemical industry, the use of ejectors is quite extensive, and their type and application depend on the specific process needs and working medium. Here are some of the types of ejectors that may be used in the chemical industry and their brief descriptions: Water vapor ejector Working medium: water vapor Features: It can

There are several aspects to consider in the selection of a spray exhaust cooling tower to ensure that it can meet specific cooling needs. Here are some key parameter selection suggestions, which are represented and summarized in a clear format: 1. Cooling capacity Flow rate (m³/h): Determine the flow rate of the cooling tower according