Models and specification sheets for steam ejector vacuum systems will vary depending on the manufacturer and supplier. In general, however, here are some examples of models and specifications of common steam ejector vacuum systems:
Model
JZ series: such as JZ-0.4, JZ-0.6, JZ-0.8, etc., the numbers here may represent the caliber of the nozzle or other key parameters.
LRG series: such as LRG-2, LRG-3, LRG-4, etc., again, the number here may represent the caliber of the nozzle or the system capability.
Specification
Nozzle diameter: Φ0.4, Φ0.6, Φ0.8, Φ1.0, Φ1.2, Φ1.5, Φ2, Φ3, Φ4, etc., in millimeters (mm).
Outlet diameter: Φ16, Φ20, Φ22, Φ25, Φ32, Φ40, Φ50, Φ65, Φ80, Φ100, etc., the unit is also millimeter (mm).
Injection angle: 45°, 60°, 80°, 15°, 25°, 30°, etc., indicating the diffusion angle of the steam injection.
Inhalation ratio: indicates the ratio of the inhaled gas to the steam flow rate of the steam ejector, such as 2~4, 2~5, etc.
Jet flow
indicates the flow range that the steam ejector can handle, such as 0.1~50m³/h, 0.5~200m³/h, etc.
Please note that the above examples are for reference only, and actual product models and specifications may vary. Therefore, when choosing a steam ejector vacuum system, you should consult directly with the manufacturer or supplier for accurate and up-to-date product models and specification sheets. In addition, you should choose the most suitable steam ejector vacuum system for your specific application needs and environmental conditions.
