technical knowledge

The main function of the spray exhaust cooling tower is to exchange the cooling water carrying waste heat with the air in the tower, so as to transfer the waste heat and dissipate it to the atmosphere. Specifically, this type of cooling tower sprays water in the air, so that the water is fully in

In refrigeration systems, condensers are required for a variety of refrigerants. These refrigerants include, but are not limited to, ammonia (NH3), freons such as R12, R22, R134a, and saturated hydrocarbons such as propane, isobutane, etc. In addition, there are unsaturated hydrocarbons such as ethylene and propylene, as well as azeotropic refrigerants such as R502 and

What is the role of a condenser The main function of the condenser is to cool the gas or vapor at high temperature and pressure into a liquid and release heat at the same time. In a refrigeration system, the condenser is responsible for receiving the hot steam refrigerant from the evaporator and transforming it

The application range of vacuum generators is very wide, mainly including the following aspects: Industrial Automation In the field of industrial automation, vacuum generators are widely used in a variety of machinery, electronics, packaging, printing, plastics, and robots. They are mainly used for adsorption and handling of various materials, especially fragile, soft, thin non-ferrous and

Vacuum generators have a wide range of applications in many fields, mainly including the following aspects: Medical field Vacuum generators are mainly used in the medical field in operating rooms, research laboratories, diagnostic centers, etc. In the operating room, they are used for suctioning, blood sucking, suction of drainage, etc.; In research laboratories, it is

The troubleshooting methods for low suction pressure of chiller mainly include the following steps: Check and fully open the condenser refrigerant liquid outlet valve If the valve is not fully opened, the flow of refrigerant is restricted, resulting in a decrease in suction pressure. Clean or replace the refrigerant filter. If the filter is clogged,

The vacuum degree of the chiller is generally controlled at about 300Pa, but the specific vacuum degree needs to be determined according to the actual situation and use scenarios. The ideal vacuum should be (5-50)*10^-4Pa. Also, note that the residual pressure within the system should be less than 5.332 kPa. Under vacuum conditions, the working

Vacuum chillers, also known as vacuum coating chillers or vacuum freezers, use water as the refrigerant, and use a compressor to compress low-pressure vapor into high-temperature and high-pressure gas, and then spray it into a condenser to condense into a liquid. It is a machine that is cooled by the throttle valve and then turned