The normal COC (Coefficient of Performance) of a cooling tower is not a fixed value and is affected by a variety of factors, including the type of cooling tower, design, operating conditions, and environmental conditions. COC is commonly used to measure the performance efficiency of cooling towers, but the exact value will vary depending on […]
What is the normal COC for a cooling tower? Read More »
Cooling towers can be of various types according to different classification criteria, and here are four common types of cooling towers: Naturally vented cooling towers These cooling towers do not need to be driven by fans and dissipate water through natural wind. Its structure is simple, no noise, no power consumption, but the heat dissipation
What are the 4 types of cooling tower? Read More »
Cooling tower water treatment refers to a series of treatment and management activities for water in a cooling tower system to ensure the normal operation and efficient performance of the cooling tower system. This process mainly involves the cleaning, recycling, concentration and reuse of water. Cooling tower is the use of air and water contact
What is the water treatment for cooling towers? Read More »
Nozzles in cooling towers play a key role in several ways. First of all, the main function of the nozzle is to spray water evenly on the packing of the cooling tower. This uniform spraying helps to increase the water-air contact area, which enhances heat transfer and speeds up heat transfer, which in turn improves
What is the purpose of the spray nozzle in a cooling tower? Read More »
There is really no absolute answer as to which type of vacuum pump is best, as different vacuum pump types have their own advantages and application scenarios, and choosing the best vacuum pump type depends mainly on the specific application needs and conditions. For example rotary vane vacuum pumps have a high vacuum level and
Which type of vacuum pump is best and why? Read More »
Vacuum pumps play an important role in industrial production and laboratory applications, but at the same time, they also have some disadvantages, which are as follows: Noise problem Some vacuum pumps may produce large noises during operation, which may cause interference to the working environment, especially in noise-sensitive places, such as laboratories or precision machining
What are the disadvantages of vacuum pumps? Read More »
There are clear differences between vacuum pumps and vacuum generators in several ways. First of all, they work differently. Vacuum pumps mainly pump air from the pumped container by mechanical, physical, chemical or physicochemical methods to obtain a vacuum. This process usually consists of three stages: gassing, gas capture and exhaust, where the gas filling
The difference between a vacuum pump and a vacuum generator Read More »
Cleaning a jet pump is an important step in maintaining a pump and typically involves removing dirt, sediment, and impurities from the inside of the pump body. The specific cleaning procedure and required tools may vary depending on the type of pump, the manufacturer’s recommendations, and cleaning requirements. In general, cleaning a jet pump may
Can you clean ejector pump? Read More »
When testing a jet pump, the following steps can be followed: First, conduct a visual inspection. Carefully inspect the suction and discharge outlets of the jet pump for physical damage, cracks or deformation. At the same time, check whether the spiral blades are worn or deformed. If these problems are found, they should be replaced
How do I test my ejector pump? Read More »
Jet pumps are maintenance-intensive. During the use of the jet pump, it may be affected by various factors, resulting in its performance degradation or failure. In order to ensure the proper operation of the jet pump and extend its service life, regular maintenance is required. Maintenance methods for household jet pumps include, but are not
Do ejector pumps need maintenance? Read More »
