technical knowledge

The difference between an ejector and an injector lies primarily in their respective applications and working principles. An ejector, also known as a jet pump, is a mechanical device that utilizes the mixing action of precision nozzles and compressed air to spray liquid at a high velocity onto a target surface. It achieves various objectives

There are several significant differences between vacuum cooling and water cooling, but here are the main differences between them: First of all, from the perspective of cooling principle, vacuum cooling is mainly based on the fact that vapor water molecules have higher energy than liquid water molecules, and the boiling point of water is reduced

The technical principle of vacuum cooling is mainly based on the evaporative cooling effect of physics. Here is a detailed explanation of the principle of vacuum cooling technology: First, a vacuum cooling system uses a vacuum pump to pump air out of a sealed container, such as a cooling chamber, to create a low-pressure environment.

Vacuum cooling is an efficient cooling technology whose application is based on two core principles: one is to accelerate the evaporation of water by reducing the air pressure, and the other is to use the latent heat absorbed during the evaporation process to achieve rapid cooling. Now, let’s explore the main purpose of vacuum cooling

Although vacuum cooling technology has significant advantages in some applications, it also has some significant drawbacks. Here are the main disadvantages of vacuum cooling: High cost Vacuum cooling requires the use of high-end vacuum equipment and refrigeration systems, which results in a relatively high initial investment cost. This can be a hindrance for small businesses

The cooling tower spray pump is a key component in the cooling tower, which is mainly used to circulate the cooling water above the packing layer of the cooling tower and dissipate heat by spraying. It works by pressurizing the liquid into the nozzle through a pump, forming a liquid mist that is sprayed at

The TDS (Total Dissolved Solids) limit for cooling towers is not a fixed value and may vary depending on the specific type of cooling tower, its use, water quality requirements, and operating conditions. In general, the TDS limit of cooling towers is usually set within a range to ensure the normal operation of cooling towers

There is no direct presence of a specific ingredient or recipe known as a “COC” in the formulation or composition of a cooling tower. COC (Coefficient of Performance) is a performance parameter that measures the efficiency of a cooling tower during operation, rather than a specific substance in the cooling tower’s manufacturing or formulation. The